Rapax 2+ J spring for SRS/Tac41/SSG10,24,96…

Thousands of happy users use our springs in their Silverback SRS/Tac41, Novritsch SSG10, SSG96, SSG96, Modify …

Springs are 13mm outer diameter, so they fit all above mentioned sniper replicas.

Rapax handmade springs – made in Europe to give you the best and most silent results for your sniper rifle .

Confirmed results of reaching 2+ Joule with a standard Silverback and Novritsch models. FPS may vary depending on the setup used in your sniper rifle replica.

Results : 2+ spring gives between 1,9J (in 300mm barrel) to 2.7J for longest barrels.

We remind you that J is measuring just with heavy bb´s and not with 0.2. Also your hop up need to be adjusted for best bb flight and not set to zero.

We recommend for you to use lithium or any thick grease on spring and spring guide.

If the Rapax spring shoots too hot for your field, you can cut some of the coils without damaging the spring integrity as long as it is done properly. Instructions how to cut a spring are in video section here https://rapaxsprings.com/how-to-cut-airsoft-spring/

The first thing you will notice is a lighter pull compared to standard springs. In short: less effort for more joule. The Silverback M140 and Rapax 2+J spring need similar pull strength, but the Rapax 2+J spring gives more FPS/joule in comparison.

Spring wire used for Rapax springs production is of the highest quality spring wire, ensuring a prolonged period of usage compared to other springs.

Tempering process of these springs is made in a way to guarantee a long lifetime and very small FPS/Joule loss over time.

Springs are made in tight tolerances regarding diameter, they prevent the “twang” sound in airsoft sniper replicas.

Facebook group